Belgian Amiga Club - ADF Collection/BS1 part 60.zip/BS1 part 60/Imagemaster d4.adf/apa.lzh/hlp_err1

Text File | 1993-08-30 | 15KB | 486 lines

\ApAssist
\: - This is the Quick Help for error messages -
\: ---------------------------------------------------------------------
\:   Written by David E. Patterson
\: ---------------------------------------------------------------------

\font topaz.font 8
\tc 1
\wr
\lj
\dd "imh_descriptor"

\index "hlp_index/index"
\toc "hlp_toc/toc"
\help "aa_help/help"

\node "err_ret"
\title "Return to Imagemaster R/t"
\next "err_000"
\prev ""
This will cancel the illegal action, and return you to \{ \ts b Imagemaster
R/t\} .

\endnode

\node "err_000"
\title "Not enough memory for operation : Error 0"
\next "err_001"
\prev "err_ret"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory for
operation.  This means that you do not have enough memory left to execute the
selected operation.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode

\node "err_001"
\title "No buffer was found for operation : Error 1"
\next "err_002"
\prev "err_000"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} No buffer was found for operation.  \{ \ts
b Imagemaster R/t \} was unable to locate a buffer for th specified
operation.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the primary and, if needed, the secondary buffers.\}

\endnode

\node "err_002"
\title "Image to be catalogued has no file : Error 2"
\next "err_003"
\prev "err_001"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Image to be catalogued has no file.  \{ \ts
b Imagemaster R/t \} was unable to find the file for the image that was to be
added to the catalog.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the path and file name that has been specified for the image to be
cataloged.\}

\endnode

\node "err_003"
\title "Catalog could not be opened : Error 3"
\next "err_004"
\prev "err_002"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Catalog could not be opened.  \{ \ts b
Imagemaster R/t \} was unable to open the catalog.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode

\node "err_004"
\title "Could not write catalog file : Error 4"
\next "err_005"
\prev "err_003"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Could not write catalog file.  \{ \ts b
Imagemaster R/t \} was unable to write the catalog file necessary for
operation of the catalog.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the path name of the file being added to the catalog.\}

\endnode

\node "err_005"
\title "Could not find image file : Error 5"
\next "err_006"
\prev "err_004"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Could not find image file.  \{ \ts b
Imagemaster R/t \} was unable to find the file for the image selected in the
catalog.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the path and file name of the image for mistakes.\}

\endnode

\node "err_006"
\title "Image file is too small for ID : Error 6"
\next "err_007"
\prev "err_005"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Image file was too small for ID.  \{ \ts b
Imagemaster R/t \} was unable to load the file because it was to small for
identification.

\endnode

\node "err_007"
\title "Image file type unrecognized : Error 7"
\next "err_008"
\prev "err_006"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Image file type unrecognized.  \{ \ts b
Imagemaster R/t \} was unable to load the file becuse it was not a file type
that is loaded by \{ \ts b Imagemaster R/t\} .

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Convert the file to a file type that is loaded by  \{ \ts b Imagemaster R/t\} .\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the file for completeness.\}
\endnode

\node "err_008"
\title "The AREXX for the PI loader was not found : Error 8"
\next "err_009"
\prev "err_007"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} ARexx for the PI loader was not found.
\{ \ts b Imagemaster R/t \} was unable to locate the ARexx script for the PI
loader that you have specified.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} :\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the path and file name specified for the script.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the PI module has not been deleted.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that ARexx is running.\}

\endnode

\node "err_009"
\title "The Executable for the PI loader was not found : Error 9"
\next "err_010"
\prev "err_008"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} The executable for the PI loader was not
found.  \{ \ts b Imagemaster R/t \} was unable to locate the executable for
the PI loader you specified.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that the PI module has not been deleted.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Check the path and file name for errors.\}

\endnode

\node "err_010"
\title "The DCTV render size was too large : Error 10"
\next "err_011"
\prev "err_009"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} The DCTV render size was too large.
The DCTV render size, that is currently selected, is too large.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Respecify the output size of the DCTV render.\}

\endnode

\node "err_011"
\title "Not enough memory for new film strip : Error 11"
\next "err_012"
\prev "err_010"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory for new film strip.  \{
\ts b Imagemaster R/t \} was unable to display the filmstrip controls due to
a lack of memory.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode

\node "err_012"
\title "Cannot zoom without a primary image : Error 12"
\next "err_013"
\prev "err_011"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Can not zoom without a primary image.  \{
\ts b Imagemaster R/t \} was unable to locate the primary image for the
specified zoom.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Re-specify the primary image.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that ther is an image loaded.\}

\endnode

\node "err_013"
\title "This Amiga does not support AGA graphics : Error 13"
\next "err_014"
\prev "err_012"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} This Amiga does not support AGA graphics.
\{ \ts b Imagemaster R/t \} was unable to locate the AGA chipset.

\endnode

\node "err_014"
\title "FireCracker-24 board not found : Error 14"
\next "err_015"
\prev "err_013"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Firecracker-24 board not found. \{ \ts b
Imagemaster R/t \} was unable to locate your FireCracker-24 board..

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that your FireCracker 24 is properly installed.\}

\endnode

\node "err_015"
\title "OpalVision display not found : Error 15"
\next "err_016"
\prev "err_014"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} OpalVision display not found. \{ \ts b
Imagemaster R/t \} was unable to locate your OpalVision board.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Make sure that your OpalVision is properly installed.\}

\endnode

\node "err_016"
\title "The Catalog does not contain any entries : Error 16"
\next "err_017"
\prev "err_015"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} The catalog does not contain any entries.
\{ \ts b Imagemaster R/t \} was unable to locate any catalog entries to be
loaded or removed.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
If there are files in the catalog, check their path and file name for
correctness.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Add images to the catalog.\}

\endnode

\node "err_017"
\title "Not enough memory for new image buffer : Error 17"
\next "err_018"
\prev "err_016"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory for new image buffer. \{
\ts b Imagemaster R/t \} was unable to create the new buffer due to a lack of
memory.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode

\node "err_018"
\title "Not enough memory for UNDO buffer : Error 18"
\next "err_019"
\prev "err_017"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not enough memory for undo buffer. \{
\ts b Imagemaster R/t \} was unable to create the undo buffer due to a lack of
memory.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode

\node "err_019"
\title "Attempt to undo with no UNDO available : Error 19"
\next "err_020"
\prev "err_018"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Attempt to undo with no UNDO available. \{
\ts b Imagemaster R/t \} was unable to undo the last operation because no
UNDO buffer has been allocated.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Allocate an UNDO buffer in the \{ \ts i \tc 10 Buffer \} panel.\}

\endnode

\node "err_020"
\title "Undo buffer is LOCKED by a P.I. module : Error 20"
\next "err_021"
\prev "err_019"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Undo buffer is LOCKED by a PI module. \{
\ts b Imagemaster R/t \} was unable to use the UNDO buffer because it is
locked by a PI module.  It is important to note that unlocking any buffer
that is in a PI module can cause the module to crash.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap You can unlock the buffer in the
\{ \ts i \tc 10 Buffer \} panel, but this is \{ \ts b not \} suggested.\}

\endnode

\node "err_021"
\title "Primary Image buffer is LOCKED : Error 21"
\next "err_022"
\prev "err_020"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Primary Image buffer is Locked \{
\ts b Imagemaster R/t \} was unable to carry out the selected operation
because the primary buffer is locked.  It is important to note that unlocking
any buffer that is in a PI module can cause the module to crash.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} :\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
You can unlock the buffer in the \{ \ts i \tc 10 Buffer \} panel, but this is
\{ \ts b not \} suggested.\}

\endnode

\node "err_022"
\title "Image buffer is LOCKED by a P.I. module : Error 22"
\next "err_023"
\prev "err_021"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Image buffer is locked by a PI module. \{
\ts b Imagemaster R/t \} was unable to carry out the selected operation
because the buffer is locked.  It is important to note that unlocking any
buffer that is in a PI module can cause the module to crash.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
You can unlock the buffer in the \{ \ts i \tc 10 Buffer \} panel, but this is
\{ \ts b not \} suggested.\}

\endnode

\node "err_023"
\title "Warning! Unlocking a buffer that is in use may crash... : Error 23"
\next "err_024"
\prev "err_022"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Warning! Unlockng a buffer that is in use
may crash the PI module.  Unlocking the current image buffer might cause any
PI modules that are running to crash.  It is important to note that unlocking
any buffer that is in a PI module can cause the module to crash.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solution\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
You can unlock the buffer in the \{ \ts i \tc 10 Buffer \} panel, but this is
\{ \ts b not \} suggested.\}

\endnode

\node "err_024"
\title "Not Enough Memory to create Splines: Error 24"
\next "err_025"
\prev "err_023"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not Enough Memory to create Splines.  \{
\ts b Imagemaster R/t \} does not have enough memory to create spline curves.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode


\node "err_025"
\title "Not Enough Memory to Draw Palette: Error 25"
\next "hlp_err2/err_026"
\prev "err_024"
\{ \ts b \tc 15 \{ \ts u Error Message\} : \} Not Enough Memory to Draw Palette.  \{ \ts
b Imagemaster R/t \} does not have enough memory to draw the current palette
selections.

\{ \ts b \ce \tc 15 \{ \ts u Possible Solutions\} : \}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off other programs that are running to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Eliminate unnecessary buffers to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
Shut off the undo buffer to free more memory.\}

\{ \ra \image "Clips/Bullet2.pic" l 10 \cap
In some cases, it may be necessary to buy more memory for your system.\}

\endnode